ZSA Moonlander Tripod Mount to 1/4" tripod mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connect your ZSA Moonlander keyboard to a standard tripod/camera mount (1/4").
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 79
- Makes
- 0
- Views
- 600
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Connect your ZSA Moonlander keyboard to a standard tripod/camera mount (1/4").
Compatible with:
- ZSA Moonlander MK1.
- ZSA Halfmoon.
Hardware required:
Both versions
- 4 x M2.5 x 12mm screws per side.
Heat set version
- 1 x ¼"-20 x 8 x 8 heat set insert (max 9mm high) per side.
The modeled in threads print and work ok, and are fine if you're not attaching and detaching from the tripod mount all the time. Heat set inserts will provide a much more robust part, and can support regularly attaching and detaching from the tripod mount.
If you’ve never worked with heat set inserts before take a look at this guide.
Print using the orientation of the STL (keyboard side down, thread up). 4 perimeters (walls), 5 top & bottom layers, 40% infill. Works fine in PLA.
Fusion 360 source file included if you want to tinker/resize/etc.
Pictured: Moonlander tented on SmallRig Articulating Arm (9.8in) to allow use under the desk it's mounted to.