1 / 1
Puffin 2D Art
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A coloured 2D print of a puffin. No MMU required.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 38
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Inspired by my last holiday in Norway, I designed this 2D art model of an Atlantic Puffin. Since the colour varies in the height of the model, no MMU is required.
I got good results with a 0.25 mm nozzle and “Hilbert Curve” as top layer pattern. But any other setup should work as well.
Printing Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm, the actual depth is 2.19mm.
Start with Black
At layer #14 (1.2mm) swap to White
At layer #21 (1.76mm) swap to Orange for the rest.