1 / 4
Race bike front fork stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for race bike front wheel with 9mm quick release shaft.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 1
- Views
- 298
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I try this solution to replace my front wheel when the bike is mounted on a trainer.
I used it now for 3 months, and it still holds.
For printing, a strong filament like ABS and a soft filament like TPU is used.
Parts print with ABS, 40% infill. 4 wall loops,
Add support
- 1x Race Bike front fork stand Foot
- 2x Race Bike front fork stand pipe connect strip
- 1x Race Bike front fork stand head female
- 2x Race Bike front fork stand half pipe 2xmale
No support
- 1x Race Bike front fork stand 9mm Shaft Hole 5.2mm P1
- 1x Race Bike front fork stand 9mm Shaft Hole 5.2mm P2
- 1x Race Bike front fork stand 9mm Shaft Hole 5.2mm P3
parts print with TPU, 25 infill triangle, 4 wall loops
- 1x Race Bike front fork stand Foot TPU plate
- 2x Race Bike front fork stand TPU
The Foot, pipe and head part are connected with a
quarter turn connection, sort of quick connect.