Desktop Raspi5 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Desktop Case for the Raspberry 5 with Power Button, Full size HDMI Output and NVME Disk support.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Hier ist der überarbeitete Text basierend auf deiner letzten Version:
---
This case needs some additional parts to complete:
- You need an HDMI adapter:
[Pi5-Connector-Adapter](https://www.waveshare.com/wiki/Pi5-Connector-Adapter)
- A 70mm fan (a 12V version works fine).
- Optionally, an NVMe adapter and SSD:
[NVMe Base for Raspberry Pi 5](https://www.pi-shop.ch/nvme-base-for-raspberry-pi-5)
I strongly recommend this over a micro SD card—it’s 10 times faster.
- Some M3 screws and heat inserts.
The new power button of the Raspberry Pi 5 is supported. Print the pushrod.m3f from clear material to guide the light from the status LEDs. Press the On/Off logo on the front, and the pushrod will press the button.
The shell is divided into two parts. I printed them separately and glued them together.