Madballs Skull Face
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 2
- Views
- 115
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
Madballs Skull Face from the mid 1980s. 179x179 to fit for all printers.
Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 179x179mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.7mm and the Actual Depth is 2.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ IIID Max Red Transmission Distance: 4
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.8mm) swap to Red
At layer #16 (1.44mm) swap to Pure Yellow
At layer #24 (2.08mm) swap to White for the rest.