CNC Sharpie Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This head was designed to act as a spring-loaded device for holding a sharpie and to be used to apply constant pressure.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is a spring-loaded head that you can attach to your CNC machine in order to mark a part with sharpie. This device can hold both Fine tip and Ultra Fine tip sharpies as there are 3 tightening bolts to align whichever pen you'd like.
Hardware required:
Qty 3: 10x32 2" long partially threaded bolts. McMaster-Carr PN: 92196A279
Qty 3: 10x32 5/16" long threaded bolts. McMaster-Carr PN: 92196A266
Qty 3: Springs 1" long. McMaster-Carr PN: 9434K44
Recommended Print notes:
Infill: 50%
Walls: 3
Print parts vertical as shown in the second picture, such that the red box is the print bed.
Print has pretty tight tolerances so may require a bit of post processing to work exactly as you intended.
Enjoy!