1 / 1
Replacement lens solution for T66 flashlights
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement lens for T66 style flashlights
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
I needed to repair a T66 flashlight that was missing its lens. This lens retainer will let you use a generic 28mm acrylic lens from AliExpress. Simply insert the lens between the 3D printed part and the flashlight and screw in place.
Recommendations:
- Material - Any. Clear filament also turns the head into a small diffuser.
- Layer Height: 0.16mm
- Brim: Outer and Inner, 3mm
- Wall loops: Max (You want the whole print to be wall loops)
- Top / Bottom surface pattern: Concentric
- Infill - N/A, your wall loops should create a solid print.
- Orientation: Print with screw threads on top.
- Supports: None