Dial Indicator toolpost mount for lathe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This symmetrical quick-change tool post holder allows quickly mounting a dial indicator on your lathe tool post.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 42
- Makes
- 0
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This symmetrical dial indicator mount can be attached on either the left or right side of the tool post, and allows for quickly re-orienting the indicator 180 degrees.
Suits toolmaster 250-200 quick change tool post. https://www.machineryhouse.com.au/l292
Designed to suit an MX 34-215 metric dial indicator, https://www.machineryhouse.com.au/q215
this has a body diameter of 55mm, and a shaft diameter of 8mm.
Uploading as .step for easier remixing.
PRINT INSTRUCTIONS:
Fillament: ABS or PETG (PLA is too brittle)
Slicer Settings: 4mm wall thickness (10 walls @ 0.4mm or 5 @ 0.8mm)
Infill: Cubic or Gyroid > 25%
Supports not needed.