1 / 2
Parametric Lack Enclosure Guide for Filament Tube
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A guide/plug for feeding a filament tube trough an Ikea Lack table.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A guide/plug for a Lack enclosure to feed a filament tube trough. By default it fits a 6.5mm tube. If you want to make changes, you can download the Fusion file and play around with the parameters:
- HeadHight: how high the plug should stick out above the table.
- Height: the total height of the plug. It's best not to touch this, as this value adapts automatically to fit the Lack table.
- TubeDiameter: the (outside) diameter of your filament tube. It's set to the width of the default eSUN eBox PTFE tube.
- Thickness: the thickness of the plug's wall.
- HeadOffset: the width of the head of the plug.
Print instructions
I printed this tube at .2mm with a brim for stability but it's possible that it'll work fine without.