1 / 3
Spray Can Shaker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
![Mark Ayton [MANTOGA]](https://media.printables.com/media/auth/avatars/c2/c285b5fa-c8f4-4c78-acd5-f9dc6a443f70.jpg)
Excentric holder for electric drill to thoroughly shake spray cans prior to painting
- Rating
- 3 / 5
- Likes
- 5
- Downloads
- 80
- Makes
- 1
- Views
- 462
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two models are provided. One for standard (large) spray cans and one for smaller Humbrol type cans. For both, spring fingers accomodate slight variations in size and hold cans firmly in place. Model is designed to use 8mm coach bolt as the shaft. It's worth using a locknut, or some Loctite to stop nut coming undone in use.
Print in PETG, with 6 walls, both for strength and so the printer isn't zigzaging back and forth to create infil in the tube section. I used 50% infil, but probably overkill.