1 / 4
Beer Slug Trap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I printed it with:
- Material: PETG
- Nozzle: 0.6mm
- Layer height: 0.4mm
- Walls: 2
- Top/bottom 3 layers = 0,9mm
- Infill: 10%
- Only the hat uses infill. At least when using a 0.6 nozzle
STL's of the assembled model, parts and Fusion 360 file provided.