Educational Magnetic Fishing Game
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Magnetic Fishing Game To Teach Letters, Numbers and Colors
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 23
- Makes
- 0
- Views
- 226
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution
An Educational Fishing Game for teaching letters, numbers and colors. Requires a 6mmx2mm magnet and a piece of yarn or thick string (~2mm in diameter) for each fishing pole and a 6mmx2mm magnet for each fish printed.
Fish pieces can be printed in letter or number sets or individualized using the blank_fish OpenSCAD file and changing the li variable.
When assembling the pole, insert the fishing line through the hole in the ‘hook’ and tie a knot large enough to keep the string from backing out through the hole before securing the magnet in the ‘hook’ with adhesive (superglue).
Place a pause command in your slicer profile when printing fish pieces at approximately layer 39 (if using .15mm layers) to place magnets in the fish 'eyes (magnets are embedded to reduce the risk of children swallowing magnets). Ensure that the polarity of all of the eye magnets are the same and opposite of the polarity of the magnet in the ‘hook’ on the fishing pole.
- Layer height 0.15mm
- Infill 15%
- Perimeters: 3
- Custom Supports (for Fishing Pole Item)
CAUTION: Ensure fishing 'hook' magnets are attached securely as they can be a choking hazard to small children.