1 / 4
VzBoT - Z axis extension
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
VZBOT 235 AWD - Extension of the Z axis by 20mm more
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
VZBOT 235 AWD - CNC kit
Z axis extension
Extension of the Z axis by 20mm more; final total 220mm.
I really disliked the height of the Z axis of only 200mm,
the reserve on the rods was sufficient, so 20mm is quite useful.
There is no need to disassemble the Z axis,
just loosen the screws on the LMK10LUU bearing and lift it up.
Then the printed piece is inserted from the side
and new (longer) screws are tightened.
That's all!
Required screws: 16x M4x30 BHCS
Print from ABS, ASA, PC or PA (CF)