1 / 3
Wallrack bracket 12mm/8mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to mount 12mm or 8mm rods on the wallrack holder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket is for the use of metal or wood rods as a shelf board on the wallholder
https://www.prusaprinters.org/de/prints/103617-wallrack-holder-multi-use
specs:
- 8mm/12mm outer diameter of the rods
- assembly by: M4x10 and M4x15 with a M4 hexnut each, no washer
- rods can be chosen of any material, no glue! bore is tolerated for press-fit!
- rods shall be cutted by pipe cutter or a normal saw
- deburring recommended
- lenght of the rods shall not exceed 1m
- 0,2mm PETG
Enjoy and like it if you really like it :D
Cheers