1 / 2
Horns on hairband
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Devil horns on a hairband
- Rating
- 4.889 / 5
- Likes
- 565
- Downloads
- 2,083
- Makes
- 17
- Views
- 7,124
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Improved V2 - better hairband connector see: https://www.printables.com/model/1446163-horns-on-hairband-v2
The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed.
Horns printed in PLA (matt PLA was used for the pictures)
- both 0.1 or 0.2 mm layer height should work.
- 15% infill is sufficient for having good stability at the base
(you can add a modifier with 0% infill at 60mm height) - for best quality print horn separately
Hairband PLA or PETG
- both 0.1 or 0.2 mm layer height should work.
- no infill needed
- organic support for the connectors
Hairband adjustments:
- too narrow … try to gently bend it in your hands
- too long … cut the ends with a cutter knife or side cutter and sand the sharp corners