Lenovo Tiny M720Q M720X M920X Top Cover Chassis Lid with 120 or 140mm Fan Opening
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After cramming as much stuff as I could into an M720Q I needed a way to keep it cool.
- Rating
- 4.5 / 5
- Likes
- 73
- Downloads
- 845
- Makes
- 3
- Views
- 7,212
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with the tamper switch pushing against it.
Warning - you'll probably snap all the clips off the edge of the front panel plastic like I did. Hence the epoxy :D
Print with Organic Supports painted on the front lip only, not needed anywhere else. Recommend PETG.
Printed on 0.6mm nozzle at 0.3mm layer height.
To Print
- 1x Top Cover
- 4x Pins
Hardware:
- 1x 2.5mm Hex Nut
- 1x 2.5mm bolt or screw for said Hex Nut
- Epoxy adhesive
Highly recommend this grill made by @Sp4s12!
https://www.printables.com/model/7714-140mm-fan-protection-grill/files
