Vase Mode Modular Trashcan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular trashcan, which can be printed in vase mode.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Modular trash can for vase mode. The trash cans slide right together.
PRINT SETTINGS:
Layer Height: 0.2 or less (for overhangs)
Cooling: 100% (for overhangs)
Supports: No (optional)
Adhesion: Brim (the large bottom will certainly warp on anything except PLA unless you have a heated chamber)
You can use any filament, but keep in mind that this should NOT be used for food waste and liquid waste. The nature of 3d printing makes the layers a perfect place for mold to grow.
If you wish to use this as a trashcan for food/liquid waste, you should print this in ABS and vapor smooth it. I'd also recommend that you print it in full, not vase mode, because the walls could break, if you plan on throwing liquids in here.