RC Ramp. Multiple sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple print and assemble ramp. In various sizes.
- Rating
- 5 / 5
- Likes
- 151
- Downloads
- 572
- Makes
- 3
- Views
- 3,588
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These are easy to print and assemble ramps. Can be used for a variety of RC vehicles. There are 3 sizes. 2.5", 4", and 6". There are also fasteners that allow you to link 2 ramps together to make them wider as needed for your track or other set up. These were designed to be printed on the Prusa XL. Assembly will required 1' screws - Drywall or similiar will work and need to have a concave shape and a flat top to fit smooth with the top of the ramp. If you are printing on smaller printers and scale down you will need to figure out what size screws will work best.
Each ramp will need a cross support bar, 3 of the corresponding braces (Low. Medium, or High) and the top piece. and then connectors (clip pieces) if you want to print more then one and connect them.