1 / 4
Brimestone's Incendiary "Molly" - Valorant
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CAD model for a prop of Brimstone's Incendiary for cosplay. Features a working hinge and press-able trigger
- Rating
- 0 / 5
- Likes
- 4
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Commercial Use
Parts required in addition to the printed parts
- 3 M5x40mm hex screws
- 1 M3x30mm hex screw
- 1 torsion spring 1mm, 9mm radius, 9 turns, 180 degrees - bought from a local site that is no longer available, but here is an alternative link, make sure to get the right specs: here
- 1 linear spring 0.4x5x15mm
All parts in PLA, settings can be whatever you prefer unless specified
for the Barrel, to keep it as light as possible:
Infill: 0% (Lightning infill)
Support: Organic
For Grip, to accommodate nuts and screws:
infill: 15%
Vertical Shell: 4
Support: Grid
Rest:
Infill: 15%