1 / 6
Flag pole fixture
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fixture to affix a flag onto a 6mm bike pole
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This item fixes a flag onto a flag-pole. It is designed to slide through a flag then onto a six mm diameter pole and then tightly grip the pole preventing the flag from flying off in the wind or when riding through low hanging branches.
Design considerations:
- Rounded sides to keep branches from dragging the fixture off of the pole
- A twist has been added to the slit where the flag is allowed through to increase drag which results in keeping the flag out from under the fixture
- The fixture hole has an inside diameter of 6.25mm which on my Bambu printer with a 4mm print head was snug enough to hold the flag tightly
If your pole has a different diameter, just scale the fixture up or down accordingly, or remix your own :)