Amana Tool RC-2263 Storage Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protects the RC-2263 CNC Surfacing Bit (and the hyper-expensive carbide blades).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The RC-2263 is my go-to surfacing and slabbing bit. But it's a 2-¾" (70mm) diameter monster that I don't want taking up space in my CNC bit tray. The carbide blades are razor sharp, brittle and ridiculously expensive.
I designed this simple case to protect the bit when it is stored. I printed it using some cheap PLA I had laying around. PLA is fine for this application if the walls are thick enough.
- 0.4 nozzle
- 0.28 layer height
(The threads work with this height. You can go less than 0.28, but anything higher and the threads might get pretty rough.) - 4 walls (minimum)
- 40% infill
- no supports required
Use CA glue to attach the stem to the cap.
Storage Tip: Snip off a couple of small pieces from a Zerust Rust Prevention Plastab and toss them in with the bit. This case seals fairly tightly, so trapped moisture may cause problems.
(STEP file included)