Garden rake as a back scraper
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.78 – €0.96 net (excluding VAT)
For file: Rake_160mm_Stick_0.15mm_PLA_MK3S_57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.87 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 57.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Garden rake as a back scraper with different handle sizes (160 ... 300 mm)
- Rating
- 0 / 5
- Likes
- 80
- Downloads
- 271
- Makes
- 0
- Views
- 980
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Garden rake as a back scraper with different handle sizes. (160 mm, 180 mm ,200 mm, 220 mm, 240 mm, 260 mm, 280 mm and 300 mm)
You can attach the holder to the scraper with superglue or with the help of an M3 nut and M3x6 screw.
Assembly
with M3x6 and M3 Nut.
Step 1 - Put the nut into the stick.
Step 2 - Push the rake onto the stick.
Make sure that both holes are on top of each other.
Step 3 - Insert the M3x6 screw
Step 4 - Tighten the screw
