1 / 2
Mini terracotta pot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
This simple print adds some nature to your indoor settings. I added a number of large hex nuts, taped together and placed them inside the pot for ballast. Then I inserted the cutting and filled the rest of the pot with fine sand to support the “tree”.
This is good for the end of a spool as it doesn't use much filament. I printed it in brown PLA to look like terracotta, but dark green, black or white would look equally good. No supports needed.
The pot stands 50mm high, with a top diameter of around 51mm.