Print in place Single colour extruder Dishwasher Sign
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple multicolour dishwasher sign that's print in place!
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 42
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A super simple dishwasher sign that's print in place, and has multicolour using a single extruder Printer! I had a problem where there were many dishwasher signs, but they were too complicated, and needed multiple parts! so i designed my own Print in place design, with multi colour option available for single colour extruders!
I used double sided tape to stick it to the dish washer. alternatively you can use command strips.
Print Settings:
Layer height: 0.2
Filament: PLA black, aqua, and red
at 10.2mm, a colour change is required for the clean, or aqua sign.
at 10.8, a colour change is required for red, or dirty.
the way that the sign is made, the clean sign has to be a lighter colour than the red sign. you could use a darker colour for clean, but it will not work as well for the red. so stick to light colours for the “clean” like: white, light blue, yellow, ect…
the same goes for the dirty sign; darker colours work better like: red, purple, black, grey, ect…
Any questions or makes, feel free to comment
Happy printing!