Cross Gears Test Print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A test print to prove my design for two gears that have perpendicular axes. Also makes for a really fun fidget toy.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 92
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
All parts print on all standard 3d printers, requires no additional tools for assembly, and assembles in seconds (snap the parts together and you're ready to go!) Add a little WD-40 to the gears for smoother motion.
Recommended print settings:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18%
Total Print Time: ~1-3 hours (depending on printer)
Total Material: ~15g
Minimum Bed Size Required:
100x100mm
**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!