ESBE ARA600 Valve Motor Knob (ARA902)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a clone of the ESBE ARA600 Valve Motor Unit Knob (ARA902) for their rotary valves with ID 17050600
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 30
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
I lost the knob of one of my rotatry valve motors (ARA600) and it is woth of 25 bucks as a replacement part. So I decided to give it a try to design my own and print it.
This knob does not fit the valve directly without motor unit. I'll create on later on for the valves alone.
The inner part is printed with PETG (Prusa Orange) and for the outer part I used colorFABB varioShore TPU with 240°C and an extrusion multiplier of 0.75. I glued both parts together and I painted the tiny stripe simply with a waterproof pen. Since the steering latches are not uniquely distributed, there is a clear direction for the stripe to be aligned. It needs to go in line with the single latch and the mirror face. See the yellow marking in the closeup image of the original knob.
For simple printing, the flat version of the outer shell is preffered.
The manufacturer part number is ARA902 or 17050600 (Ersatzteile PDF page 10).
The valve motors this knob fits to are:
In contrast to another non-open-source model here on printables, it has the latches to snap in both positions (fixed with motor and free turning). It also consists of two parts to be printed with different colors or materials. I found this model when creating my ESBE collection and after I designed this one.