1 / 2
5" Dust Collector to 4" Flex Duct
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter connects a 5" dust collector inlet (female 125mm/5in) to a 4" flex duct (male 100mm/4in)
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 101
- Makes
- 0
- Views
- 302
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I don't use the Y that came with the dust collector since I use a cyclone separator, so I created this adapter. It has a shoulder in the fitting that rests on the inlet flange of the blower. It also does not go all the way down to the blower. I did this to allow sealant or foam strips to be placed to seal the adapter to the blower. Mine is rigidly installed so there is minimal chance of torquing the adapter, so I left all the print settings standard, printed vertically with no supports.