1 / 4
The Owl House Porta-Hooty
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model of Porta-Hooty from The Owl House with flexible print-in-place neck
- Rating
- 0 / 5
- Likes
- 42
- Downloads
- 128
- Makes
- 0
- Views
- 765
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
Model of Porta-Hooty from The Owl House.
Hooty has an articulated neck.
The length of Hooty depends on the number of segments you print.
There is also a version with a fixed Hooty.
| Dimensions | Length | Width | Height |
|---|---|---|---|
| House | 46mm | 74mm | 85mm |
| Hooty | 32mm + 6mm per segment | 37mm | 34mm |
Print Instructions
General Instructions
Everything was printed at 0.2mm layer height. No supports required.
You can either print the house with fixed or flexible Hooty.
- Fixed:
- “porta-hooty fixed”.
- adaptive layer height recommended.
- “porta-hooty fixed”.
- Flexible:
- “porta-hooty roof”
- print in red
- “porta-hooty house”
- uses filament changes
- initial: white
- 33m: gold
- 33.4mm: white
- 34mm: red
- 34.4mm: gray
- 34.8mm: gold
- “hooty head”
- brim recommended
- “hooty segment”
- brim recommended
- print as many copies as you want
- “hooty end”
- “porta-hooty roof”
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#