1 / 3
Supports for Talon SWA Repair
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support set for repairing Talon SWA
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Size allows these to be printed in any plastic and be functional, shown is Overture TPU, would recommend TPU with 3 walls and 15% gyroid infill to fully support and leave it squishy enough to avoid risking damage to the outer extrusion of the Talon or its decals. Printed in PLA or other hard material use masking tape or felt to cushion the support and protect the anchor. As a pair mount these to a flat board or mount them down directly. Through holes allow for ¼" hardware or 7mm Hardware.