Min(imalist) Bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I wanted a trash can / rubbish bin that was a decent size, but everything I found seemed to have high print times and/or used lots of filament.
So here's my design for the Min(imalist) Bin. It has 2 rings at the top, one to secure a plastic bag, and the other for the legs to slot into.
With a 200mm diameter top ring and a height of ~250mm it took around 3 hours in 2 separate prints on a Qidi X-Plus 3. I've included some smaller/shorter legs that should print on the smaller bed size of Bambu printers.
I've provided .3mf files with optimal nesting so that the print can be completed in 2 prints easily.
Obviously the model can be resized, but the tolerances between the legs and ring may be out if resized too far.
Tolerance between the top 2 nested rings is 0.25mm.