Foldable Silicone STP Stencil for FTMs (cheaper than most alternatives)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stencil for a stand-to-pee device intended for those who are AFAB, FTM, etc.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Public Domain
An STP stencil for those FTM / AFAB / etc. who would like the convenience of using a stand-up relieving station without the use of a packer, or those who don't mind their current equipment. (Sorry about the vagueness of language here, just trying to keep it from being flagged or something).
Instructions:
- Traced over onto 1/8" rubber silicone sheet(it's only a little flimsy, use thicker if you want)
- Glue with silicone glue (super glue does not work), spread it evenly for a small contact patch near the straight edges on one side (see pic).
- Clamp it with either small clamps, hang it over the edge of a table with something heavy on top, or large folder clips. Try not to contact the edges with the clamp.
Features:
It is foldable, fits neatly in any pocket, because it has a semi-teardrop shape, will inflate automatically, soft against skin, but also durable and only deforms a little bit during use. Use thicker rubber sheeting if you want it to be more rigid. Goes through airport security no problems. Please test use it in the shower first, lol. Works fine for me, but I'm also a small person(5'-7, 125lbs), you may need to use the +10% .stl file if you are bigger. $12 for the silicone sheet on amazon, and $6 for silicone glue at home depot / amazon. Can make roughly 25 STPs (but they are obviously very reusable, since silicone doesn't absorb moisture).
Good luck!