SanDisk Cruzer Ultra minimal shell
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimal shell for a broken Sandisk USB Stick.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 2
- Views
- 247
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimal protective shell for SanDisk Cruzer Ultra with a broken case. First you need https://www.printables.com/model/452052-usb-stick-repair-sandisk-cruzer-ultra by Willi, then just slip the cover on. You can add a dab of glue, but it's not necessary if you scale down the model a bit. This can be done in the slicer (scale only x&y), or using the parameters in the OpenSCAD file.
98% worked well for me and gave strong friction fit with TPU A98 (PrusaXL), and I'm including this scaled down model. The print takes only a few minutes, so if you're not sure you can just print it with different scales and use the best one.