IKEA BISSA Shoe holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.39 – €1.70 net (excluding VAT)
For file: IKEA BISSA Shoe holder_0.6n_0.2mm_PETG_COREONE_46m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.54 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 46.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Prevents the shoes in the shoe cabinet from tipping over.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 19
- Makes
- 1
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
The holder prevents the shoes from tipping over when you close the flap.
It is easy to print and simply clips onto the middle board.
I recommend at least four outer perimeters; for other settings, you can use the slicer's default settings.
I have been using the separator since 2021 without any problems.