Stream Deck MK.2 15-Keys Stand (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.35 – €4.10 net (excluding VAT)
For file: Stream Deck MK.2 Stand_0.4n_0.15mm_PETG_MK4IS_3h31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.73 excluding VAT (range midpoint).
- Weight reported by the author
- 55 g
- Print time reported by the author
- 3.5 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Finally customize the angle of the Stream Deck, a drop-in replacement for the OEM fixed-angle stand. Also parametric.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 81
- Makes
- 0
- Views
- 360
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Introduction
The official Stream Deck stand is locked at 50-degrees. For me, this causes glare off the keys from my overhead lights. So I modeled a custom stand with the goal to mimic the original design, even down to the 2-degrees taper.
This model angles the Stream Deck at 38-degrees. I've also included the Fusion 360 model, so you change the angle to what you want.
Bill of Material (BOM)
- Non-Slip Dots (Optional), 8mm diameter. For example (AliExpress). Keep the Stream Deck from sliding around.
- Wheel Weights (Optional), 1oz. For example (Amazon). You want the base as heavy as possible.
Printing
Printing should be straight forward, no supports. I recommend 3 perimeters and a 0.15mm layer-height with reverse aligned steams.
Pictured is PETG-CF from TINMORRY.