Oil drain guide honda snowblower
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.65 – €2.01 net (excluding VAT)
For file: Oil_drain_funnel_HS970_2009_0.3mm_PLA_MK3S_1h30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.83 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 1.49 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a extender for oil draining a Honda Snowblower with ll fit otbelts.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 708
- Makes
- 3
- Views
- 2,889
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This is a extender for oil draining on a Honda snowblower with belts.
-One model is made for 2009 HS970 with belts. This is the type with the “tongue” under the drain plug. You need to add support on the “wings”. The 18cm one fits perfectly, but if you want a longer one, i added a 21 cm as well :)
-The other model is made for 2022 HSS970 with belts. This is the type with a extra long drainplug and without the “tongue”. You need to add support to the “spoiler/wings”
It is designed to fit these two models, but it will fit others that have the same drain plugs as pictured here.
I just made a longer version of the 2009 HS970 drain to fit other snowblowers with wider belts.
Printet with PLA, 0,3mm layer height. Needs support on the tabs at the top.
Also added 3mf files so you can modify as you like :)