1 / 1
Small Slotted Resin Scoop
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small slotted scoop for removing failed print components from the resin vat
- Rating
- 4.333 / 5
- Likes
- 14
- Downloads
- 109
- Makes
- 3
- Views
- 403
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small slotted scoop for removing failed print parts from a resin vat. Scoop is 42mm across the front. The front edge is angled to help lift material away from the FEP sheet. Slots are somewhat less than 1.5mm across.