1 / 5
Tokens of Inspiration (DnD 5e) - Vertical, Smaller, Double Sided — image 1
1 / 5

Tokens of Inspiration (DnD 5e) - Vertical, Smaller, Double Sided

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A smaller version of @Conr8r "Tokens of Inspiration" for vertical printing

Rating
5 / 5
Likes
81
Downloads
374
Makes
4
Views
1,152
Reviews
5

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I love the original “Tokens of Inspiration” by Conr8r but after printing it I discovered it was a bit too large and wanted something the size of a regular coin. I tried scaling it down to 50% and printing it laying flat, but the result was unintelligible(see pictures)

My solution was editing the model for vertical printing, tried a bunch of ideas and after 10 or so tries landed on a version that prints reliably and looks good. 

Printing it vertically was my solution of getting the resolution required to print the smaller text, but I discovered there are other advantages to doing it this way. The tokens look better, are smooth to the touch and feel very nice when handled. This makes them a great fidget spinner, quite literally. You can spin them on the table to get a cool effect.

I added the .gcode file I used for printing the coins in the pictures, but be aware that those are the profiles that worked for my MK3. 

If you decide to use your own profile be sure to modify the following settings:

  • Print Settings → Layer height → 0.15mm Quality (You can't go lower than this, I tried and gave up due to bad overhangs);
  • Print Settings → Layers and Perimeters → Avoid crossing perimeters - True; (You want to avoid crossing perimeters while travelling for a cleaner look);
  • Print Settings → Layers and Perimeters → Avoid crossing perimeters-Max detour length - 100mm;
  • Print Settings → Layers and Perimeters → Seam Position → Nearest (This is the setting that worked for me, there might be better options)
  • Print Settings → Layers and Perimeters → External Perimeters First - True;
  • Print Settings → Infill → Fill density → 80% (You want a lot so that the coin feels heavy, but DO NOT use 100% as it will overflow and leave marks on the surface and make the letters unreadable);
  • Print Settings → Skirt and brim → Brim width → 8mm(Mandatory for vertical printing);
  • Filament Settings → Filament → Nozzle Temperature → 200 degrees C(use a lower printing temperature so that the bottom overhang cools fast and prints better);

Even with all these settings I still had slight issues with the overhangs, so I moved my printer near the window, left the window open and printed the coins during nighttime when the temperature is lower. This fixed the overhang issues and made the tokens look almost perfect.

 

Tags