1 / 1
Reinforced Nightblood
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjusted for a support rod and alignment pins down the length of the model.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 83
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
The Nightblood_Segmented_Template.stl has the support rods in place so you can adjust length and diameter before recutting with the boolean tool if you want different sized support rods or pins.
.25" threaded rods are commonly available and you can use either filament or bailing wire for the alignment pins.
Segments are cut to be printable on a 235mm tall bed.