bc250 to amd cpu cooler mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
bc250 to amd cpu cooler mount
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 808
- Makes
- 1
- Views
- 5,250
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
bc250 to amd cpu cooler mount
recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it.
do NOT print with supports, as it will fill in the mounting holes!
recommended to print with between 80 and 100% infill
please be careful while mounting a cooler to your bc-250, as silicon dies are very fragile and easily broken if pressure is applied unevenly
if you have issues with the cooler clips sliding off, you may have to file the clips on the bracket side slightly until flat.
use 8-32 or smaller screws to mount adapter to the PCB. insert screws from the bottom and add nuts on top.
thanks to owee456 on discord for getting the final mounting pressure down!