Navimow Winterization caps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I needed to leave my buried navimow cables and antenna pole out in the winter, but I wanted to protect them. Annoyingly the navimow package doesn't include caps for the cables and they have some weird custom M13x1mm threads.
I hope this set of caps for the antenna pole and the power/signal cables helps people out so you don't have to dig up the cables or worry about them getting junk in them during the winter. This is for my Navimow i-series mower, but this may also work for h-series if they use the same cabling.
Printed here in Bambu HF black TPU to help with durability and ease of flexible installation. I used 0.2 mm layer height, but finer should work too. I found that the pipe cap needs a brim to make sure it doesn't get loose during the print. Print in orientations shown.
I iterated on the threads fit until I found something that worked well. Enjoy. 3MF and STEPs provided.