BB86 Press Tool (50-41-24mm, for M10)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One can use a M10 threaded rod with some nuts and washers to press fit a BB86 bottom bracket into a bike frame.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
The inner discs are actually smaller, just to be safe: 40 and 23mm.
I made this from scratch in tinkerpad, but I was inspired by the https://www.printables.com/model/475853-bb86-bottom-bracket-press model, which is probably very similar, only it is suppose to work with a thicker rod than I had. Also, the writing on the bottom slows down the print - the side one in my model does not, but it is not visible either :))
With a .8mm nozzle, .4 layer height, 24% infill and 30mm/s print speed, it took about 50 minutes to make one.