Kria KV260 dev board case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the dev board for the Kria KV260.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 329
- Makes
- 0
- Views
- 1,127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- GNU General Public License v3.0
Case for the dev board for the Kria KV260.
Source Files
OpenSCAD file included. The source files depend on BOSL2. The design is parametrized to modifications of parameter. For more intricate modifications, it is advised to use the cad model provided by Xilinx on the kv260's web page (that I cannot share for licensing reason).
Printing
The print does not require support, as long as bridging and overhangs of 45 degrees are supported. The parameter layer_height controls the height of bridged sections. The uploaded models have layer_height=0.2 millimeters. You may want to change the parameter and regenerate the models if the printer uses a different layer height.
Construction
The top.stl contains 4 slots for heated inserts. M3 screws of 6 mm or larger should be screwed from, bottom.stl , the kv260 dev board, to the top.stl through its installed heated inserts. Then, silicone pads of diameter 1 cm should be installed on the bottom side.