DTI Clamps
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.74 – €0.90 net (excluding VAT)
For file: DTIBarrel-Nut-V2-all_0.6n_0.4mm_PETG_MK3S_39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.82 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 38.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
for 8mm DTI and 10 and 12mm rods
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 68
- Makes
- 0
- Views
- 299
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Clamp for 8mm DTI and for magnetic DTI-holder with 10 and 12mm rods.
Additional hardware needed:
M6 Nut and Washer
M6 threaded rod - 40mm long
As the printed nut is not really strong I highly recommend to fabricate it from aluminium or steel.
Update 2.11.2024:
Added version 2 of nut and barrell which with a flat, so it can be printed in a better orientation for more strength when tightening. - But metal is still the better solution:-)