1 / 4
Garmin VivoSport Replacement Body
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print was designed to replace the band of a VivoSport fitness tracker, which is prone to band breakage.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
This replaces the band and overmolded silicone body of a Garmin VivoSport. The old band and overmolding needs to be removed, and it can be printed without supports. The height needs to be reduced slightly, which I will upload if I get the chance. Scaling Z down by 1-2 mm would probably do the trick, but might make the watch bands a little harder to connect. For the bands (straps) a standard 18 mm band can be used as long as it uses a pin to hold it in place (refer to images).