Adjustable Bicycle Rear Shock Maintenance Dogbone
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.76 – €4.59 net (excluding VAT)
For file: Adjustable Shock Dogbone_Final.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.17 excluding VAT (range midpoint).
- Weight reported by the author
- 69 g
- Print time reported by the author
- 3.59 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An eye to eye adjustable replacement for a bicycle rear shock to hold the frame secure from rocker arm contact.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 1
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
One model, prints in 2 parts. No support required.
Creates an eye to eye adjustable replacement for a bicycle rear shock to hold the frame secure from rocker arm contact, and make it easier to move and store the bike during maintenance.
Adjustable from approximately 157mm to 230mm eye to eye. May require clamping reinforcement to stay together at longer adjustments. Shock eyelets are 15mm.
Suggestions for improvement are welcome.