Ferrari Sign
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.71 – €3.31 net (excluding VAT)
For file: Green_0.4n_0.2mm_PLA,PLA,PLA,PLA,PLA_MINI_2h45m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.01 excluding VAT (range midpoint).
- Weight reported by the author
- 43 g
- Print time reported by the author
- 2.75 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
a ferrari logo that prints multicolor on one smooth layer and fills the print bed of a prusa mini
- Rating
- 4 / 5
- Likes
- 9
- Downloads
- 86
- Makes
- 1
- Views
- 407
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Included are all svg files so you can get it up and running on whatever printer you have. If you have a mini you can simply use the g code. Otherwise load everything into prusaslicer as a multipart print and use prusaslicer to align everything. You will need the following colors
White
Black
Yellow
Red
Green
If using the G code, start in green, then switch to red, then yellow, then black then white.