Spiked Roller for Sensation Play
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spiked roller that fits onto a standard 4.5" mini paint roller handle. Adds a little spikey sensation to playtime.
- Rating
- 0 / 5
- Likes
- 71
- Downloads
- 380
- Makes
- 0
- Views
- 1,675
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Assembly
1. Insert the pointed edge of the C-shaped clip into the open side of the roller.
2. Apply some adhesive to the plug and insert behind the clip.
3. Insert the paint roller handle into the open side.
Note: Do not get any glue on the C-shaped piece, or the print will not spin.
Print Instructions
Print with standard settings, with no rafts or supports. Thin print layers will give a sharper spike.
For the clip, print with a brim to ensure stability. There is a thin layer on the bottom of the model that should prevent the brim from generating on the inside of the clip.