Articulated Cute Snail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Articulated Cute Snail with a much too small shell (Single or Multicolor)
- Rating
- 4.933 / 5
- Likes
- 276
- Downloads
- 1,579
- Makes
- 17
- Views
- 3,497
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Standard Digital File License
Tips for printing:
- Filament: PLA (only use PLA)
- Supports: No!
- Layer height: 0.16mm (optimal) (0.2mm also works)
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: -
- Detect thin walls: -
- Brim: No!
⚠Warning⚠
Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
You can scale the snail a little smaller if you want. When scaling down the model, please make sure that the eyes do not become too small!
Colors and filament I used (4 Color Version):
- PLA / Orange - for the body
- PLA / Red - for the snail shell
- PLA / Black - for the eyes
- PLA / White - for the eyes
Or decide for yourself which colors and how many you want to use!
When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!