Customizable SpaceX Starship 1:100 Scale

You need:

285 grams of Grey, or appropriate color of your choice

20 grams of TPU

~ 50 to 100 grams of black pla(Optional)

I made this a month ago, and i am posting Starship (Superheavy, and catch tower will be posted later, as i have a plan to make chopsticks motorized, and superheavy, be able to fly, to be caught by the tower). I will post a picture of the design.

The body of the superheavy is done, however i will have to make modifications for motors, and control of grid fins.

The Starship's heat shield, has printable parts that you can print, however, if you do not have black PLA, TPU, you can use Black Insulation Tape as i have used, althought quality will be lower(it is better, and easier to use tape). Use if only you have a strong adhesive, and at your own risk.

The flaps move, but are not controlled by any mechanism. I have designed a mechanism, but is not worth installing it. You need string, and have to install a system of gears, which is over complicated, which is very time consuming and annoying. The main problem is that the gears slip, which is caused by a low friction fit, you may use metal screws, making a thread to hold it in place, if you want to modify it.

The model is 47.5 cm tall, and 7.5 cm wide(15 cm with flaps)

This Superheavy features 35 raptor engines, instead of the usual 33.

For mounting, you can use double sided sticky tape, if you have a spare superheavy.

You can use glue, to join all segments, or use a soldering iron with a fitting to make it smooth(use glue, as a soldering iron may make the surface worse)

Print some parts in sup[orts(The fitting for the rear flap, must have support, you can add a support blocker, for the main body)