Elegoo Neptune 4 Pro PSU Cover 92mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix from OrzOrzOrz to fit a Noctua 92mm NF-A9x14 PWM
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 44
- Makes
- 0
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed Original from OrzOrzOrz to accomodate a larger 92mm fan from Noctua. I did not alter depth but sized fan mounting holes to use M3 x4x4.2mm OD Threaded Inserts.
Used a Buck Converter to step down from 24v to 12v
If using stock feet on Neptune 4 Pro you will need to increase height. I increased my height 6mm to give the bracket clearance from my table and for proper airflow.
Something that I was not aware of when editing, the original mounting holes don't quite line up with PSU case holes. 4 holes lined up and I was able to securely mount to PSU case.
I will edit sometime in the future when I make the same edit for the Mainboard fan
And yes the Buck converter is stuffed in there.
43dB from 2 feet away (at my computer)
Creality PLA-CF
205 C
.12 Layer Height
Support On
Parts List-